DTF Printing Pressing Instructions

ollow these steps to get the best results from your DTF transfers. Correct temperature, pressure, and peeling are key to long-lasting, vibrant prints.

✅ Standard DTF Transfers

  1. Pre-Press Your Garment

    • Heat press at 280–300°F (135–150°C) for 5 seconds.

    • This removes moisture and wrinkles.

  2. Position the Transfer

    • Place your DTF transfer face down on the garment.

    • Use heat-resistant tape if needed to keep it in place.

  3. Press

    • Heat press at 300–320°F (150–160°C) for 15–20 seconds.

    • Use medium to firm pressure.

  4. Peel Film

    • Allow the transfer to cool completely (cold peel).

    • Gently peel the film from one corner in a smooth motion.

  5. Final Press (Recommended)

    • Cover the design with parchment paper, Teflon sheet, or a finishing sheet.

    • Press again for 5–10 seconds for extra durability and a smooth finish.

✨ Glitter DTF Transfers

  1. Pre-press garment: 280°F for 5 seconds.

  2. Position transfer.

  3. Press at 300–310°F for 15 seconds with firm pressure.

  4. Let it cool completely (cold peel).

  5. Cover with parchment and repress for 5 seconds to lock in glitter finish.

⚡ Aftercare Instructions

  • Wash garment inside out in cold water.

  • Tumble dry low or hang dry.

  • Avoid bleach and harsh detergents.

  • Do not iron directly on transfer.

With proper pressing and care, your DTF transfers will last through 50+ washes while keeping their color and detail.